Vr6 johnny 3 Posted February 22, 2018 Report Share Posted February 22, 2018 I have 1.4gl mk3 golf and I’m looking to go vr6 and have the hub set up to 5x100. Do do I need to run new brake lines to the rear? i think i have to change the pedal box? anything anyone can tell me or so advice on making the swap happen would be much appreciated thanks in advance. John Link to post Share on other sites
p0u1 14 Posted February 23, 2018 Report Share Posted February 23, 2018 I converted my 1.6 to vr6 I didn't need to replace the pedal box you take the clutch cable out and the clutch master cylinder clips into the pedal/screws on the fire wall. As for break lines, you will be able to use the hard lines but not the soft ones. Feel free to ask any more. Link to post Share on other sites
Vr6 johnny 3 Posted February 23, 2018 Author Report Share Posted February 23, 2018 Thanks for your reply bud. So removing the cable and clutch master cylinder clips then how does it work hydraulicly? Will I need to add anything to it did you manage to take any pics of your conversion that could help me in what I need to know bud? Link to post Share on other sites
p0u1 14 Posted February 24, 2018 Report Share Posted February 24, 2018 I did mine about 8 years ago, you will need to get the master cylinder from a vr6 and then there is a plate that you can remove behind the clutch pedal where you will install the cyclinder. How are you going about the conversation? Have you got a Donna car? Link to post Share on other sites
Vr6 johnny 3 Posted February 24, 2018 Author Report Share Posted February 24, 2018 Yes I have a donor car Link to post Share on other sites
Recommended Posts