matrix 0 Posted September 11, 2005 Report Share Posted September 11, 2005 ive cleaned the rear abs sensors today from the history i found that the o/s front was replaced a while back im just wondering if i fix the prob the light will stay on unless cleared ? Link to post Share on other sites
VR6Rich 3 Posted September 11, 2005 Report Share Posted September 11, 2005 The light will usually go away if the fault isnt present any more and was an intermittant fault. In my experience you have to drive for a few meters for the ecu to recognise the fault has been cleared. Link to post Share on other sites
tommy 0 Posted September 11, 2005 Report Share Posted September 11, 2005 Like rich said... if the light is on then you still have a problem.......chance's are another sensor is playing up....your best bet is to get the vr on vag com ......that will pin point exactly what is going on, be it a speed sensor or a problem with the pump...from passed experience 99% of the time if the sensor is faulty no amount of cleaning will sort it out....as I remember the front sensors are cheaper than the rear. I paid about £80 quid for a rear but that was a couple of years ago....g&sf and euro car parts stock them now.....and should be a bit cheaper than main dealer Link to post Share on other sites
stuey 0 Posted September 11, 2005 Report Share Posted September 11, 2005 I think the rears are about Link to post Share on other sites
matrix 0 Posted September 12, 2005 Author Report Share Posted September 12, 2005 right as i said ive taken out the rear ones but the front sensors seem bloody welded in there how do u get them out ffs Link to post Share on other sites
Recommended Posts