Jump to content

Ambiant temp display?


Recommended Posts

My MFI doesn't show the ambient temp, it flicks straight from the oil temp to the clock.

Checking out the owners manual and it says that if you have climatronic control the ambient temp will be displayed in this rather than the MFI.

I can't see any climatronic stuff in the car, i'm guessing it would replace the normal blower/heater controls.

Is my MFI fooked, or am I so blind i can't see the climatronic controls?

Link to post
Share on other sites
Guest Olly_K

no, your MFA is not fooked. I've got this problem on mine. Ever since i ripped slitter number 3 off, it took the ambient sensor wires with it. Now the wires just hang down, and i have the same problem as you. Im not exactly sure where its located, but the wires are hanging down underneath the airbox

Link to post
Share on other sites
nice one wilko........havent been arsed to jack the car up and have a look where the wires lead to !

When I initially looked at the car there was a connector hanging down at the front, could be the one, will have to get my back dirty and roll around on the floor at the weekend to have a look.

Link to post
Share on other sites

lads you dont need to jack the car up as you got access to it from the top. its a wire that leads to a connector that is plugged to this sensor.....its a funny looking thing so you cant miss it.(the sensor that is) :)

you'll probably just find it hanging loose either behind the driver side fog or just under it.

Link to post
Share on other sites
×
×
  • Create New...