madmonkee 0 Posted April 22, 2004 Report Share Posted April 22, 2004 drivers front seems to be about half an inch away from the arch, as where the passenger front wheel is about an inch. Why is this? Could the subframe[if it has one] been knocked out of place? Is it easy to fix? Get it on a jig and see? The thing is the car all alligns up so according to that the car is all ok but it just dont look ok. Link to post Share on other sites
binliner 0 Posted April 22, 2004 Report Share Posted April 22, 2004 mine was like that as well which is why I opted for coilovers... it was either that or get a fatter girlfriend Link to post Share on other sites
Guest Olly_K Posted April 22, 2004 Report Share Posted April 22, 2004 LMFAO ! Link to post Share on other sites
VRmonster 1 Posted April 22, 2004 Report Share Posted April 22, 2004 i think he means left to right, or maybe camber rather than height. i have the same problem with mine, seems as thought the front axle has moved to 1 side lol. Link to post Share on other sites
madmonkee 0 Posted April 22, 2004 Author Report Share Posted April 22, 2004 does it give problems with ya wheels?? looked at the print out from the machine of wheel allignmentness, an it tells me that the "thrust" of the car is 0.02degrees so more or less smack on forwards. Camber, tracking and allignment of the rear is spoton. The front toe is slighty different but well within tolerances, the camber is -0.52degrees for the left(passenger)wheel and drivers is 0.03degrees 2 over the max limit. But was told its nothing to worry about. So there is a fair difference between the two wheels 0.5degrees so it could be that ? Link to post Share on other sites
VRmonster 1 Posted April 22, 2004 Report Share Posted April 22, 2004 yeah, i remember knocking my wheel and throwing the camber out by 1.5 between the 2 wheels, that looked bad, so it might just be that. Link to post Share on other sites
madmonkee 0 Posted April 22, 2004 Author Report Share Posted April 22, 2004 did the same, out by 1 degree when i did it Link to post Share on other sites
madmonkee 0 Posted April 23, 2004 Author Report Share Posted April 23, 2004 VRm8ty, aparently its piece off piss to re-allign the front. 4 bolts Link to post Share on other sites
VRmonster 1 Posted April 23, 2004 Report Share Posted April 23, 2004 yeah, ive adjusted mine myself, its on the actual front strut itself, 2 bolts eaither side. but its the fact that i have adjusted it to the maximum it will go, and the camber is still out, so im gonna replace the wishbones as i think i may have bent one. Link to post Share on other sites
Recommended Posts