xyber 1 Posted October 6, 2006 Report Share Posted October 6, 2006 I just bought a BMC coz I heard another VR with one, i was sold insantly, plus if they are good enough for formula 1, they'll do for a vwAlso they started coz some bloke couldnt find the exact spec filter he needed, so he built his own, It was so impressive he started marketing them and pro race teams started taking interest. All said though the piperx viper was a close 2nd, prefered the sound of the bmc though Link to post Share on other sites
speedyoli 0 Posted October 22, 2006 Report Share Posted October 22, 2006 jabba sport advised a cda bmc for my old g60, they come in two sizes, i had the bigger 1 which was £170, and gave the k&n away!! good stuff im going to put one on mine asap. Link to post Share on other sites
shay 0 Posted November 11, 2006 Report Share Posted November 11, 2006 I just had my BMC CDA fitted by Stealth and all i can say is i love it. Link to post Share on other sites
Tony_Pedwell 0 Posted November 21, 2006 Report Share Posted November 21, 2006 Hi there just fitted a pipercross panel filter, sensible money and a real noticeable difference. Well chuffed. Link to post Share on other sites
AndreWilk 1 Posted December 4, 2006 Report Share Posted December 4, 2006 Just fitted a BMC CDA this weekend, didn't bother with the cold feed yet but might not cause it sounds amazing! Feels a little more responsive from lower down too.Bye Bye mpg can't stop hitting the loud pedal now! Link to post Share on other sites
Dima 1 Posted December 12, 2006 Report Share Posted December 12, 2006 Does the induction kit noise kick in straight away or only when you boot it? In my 1,4 you could only hear it when your foot right to the floor (was a K&n one)I just want sometime that only heard when you boot it or like in civic type-r it only comes on just before the VTEC kicks in. Link to post Share on other sites
vr6newcomer 1 Posted January 9, 2007 Report Share Posted January 9, 2007 hey, i have a slightly different spin on this whole thread..question..do u want to go faster? or do u want to make more noise? if u want noise, go for an expensive kit by all means, but i believe theres too much hot air around the filter in its normal position to ever give reasonable gains for £200:00 odd pounds, i have swiss cheesed my air box and am putting in a jetex panel filter, later in the summer i might make my own feed pipes and move to the bottom of the bumper, where it gets proper cold air (my mate has this on his vr6 sc (vr6monte). Link to post Share on other sites
mkoneboy 1 Posted March 25, 2007 Report Share Posted March 25, 2007 I am thinking of a RamAir, £76 on ebay at the mo, any good? Link to post Share on other sites
patpong_pete 0 Posted March 25, 2007 Report Share Posted March 25, 2007 Ram Air =meant to be great noise from Ram Air but its Massiveand also suffers from heat intake from engine £80Viper=is part of pipercross and its same as ram air but has metal around filter to stop the heat intake problem £100swiss cheesed my air box=budget but with panel filter from jetex or K&N will be fine £30BMC CDA=Bhp, good noise, still quite on tickover looks the partbut its going to cost about £150-160 and need to buy the silocone hosesome people don't bother with the cold air feed but up to utry and go to a meeting or show and the u can see hear and ask all about the air filters plus should get 10-15% discount at some of the shows good luck and let us know which one you choose? Link to post Share on other sites
tubby 0 Posted March 25, 2007 Report Share Posted March 25, 2007 Well i have been following this thread for a while now and went out to halfords today and boufght myself a universal ripspeed cone filter ,26 quid and makes the best noise not bothered about heat soak as bhp gains in any filter are minimal anyway.I was only after the roar and to be honest it sounds better than the k and n cone filter that was on my other vr.So to summarise air filters bhp gains are only minimal imho so dont bother spending money that could be better spent else where.virgin Link to post Share on other sites
patpong_pete 0 Posted March 26, 2007 Report Share Posted March 26, 2007 can we put this to bedthe only way is get sound clips mp3 or even video clip mp4may be post on you tube!£26 bargain got the noise and sound from v6 and pocket money left overso what are u buying next with the money u have saved? Link to post Share on other sites
tubby 0 Posted March 26, 2007 Report Share Posted March 26, 2007 I will try and get some sound clips of mine i`m sure you will be impressed Link to post Share on other sites
Paul1982 0 Posted April 2, 2007 Report Share Posted April 2, 2007 Well i have read this whole thread lolI have a mate who works in Motorworld and i had the luck in trying lots of filters.K&n, pipercross, green cotten, universal and a carbon forsed one.The carbon fibre forced induction kits was probably the worse sound but the cold air feed meant the car was faster topend, but i noticed a loss of power in low revs (Not good when u live in wales with all the hills lol)The K&n felt like the standard box but made a rumble when floorin it.The pipercross was slightly better with a nice rumble but when the engine was hot the power dropped.I ended up falling for the Green Cotten Filter.... The power was there all the time and it rumbles all the time. Its quiet at 3000rpm but sounds like a monster when flooring it. To me its by far the best all rounder.I paid £80 for it and i had £200 waiting to pay. So if it costs more then its not always better!! Link to post Share on other sites
Guest innocent Posted May 16, 2007 Report Share Posted May 16, 2007 ive got a pipercross. I havent noticed an increase in the pull but the noise gives it big licks at 4500. Minimal noise when idling which leads to a nice surprise when you pull away. Link to post Share on other sites
Big_Bob 0 Posted May 18, 2007 Report Share Posted May 18, 2007 Can i ask a sensible question? Has anyone dyno'd their machine with any of the mentioned induction kits/drilled boxes fitted? Extra noise is all fine and dandy but when you're after real performance gains either in torque, reponsivness or top-end, there is no substitue for a graph! I have ordered a K&N induction kit 'cos i'm a K&N fan, but reading here this thread the BMC sounds good as does the Carbonia thing, but its subjective. On my old Fiat Coupe all I did to the breathing was drill the air box and put a K&N panel filter in it and the difference was incredible - the low down torque, before the turbo had a chance to wake up was incredible, and increased toruqe across the range by about 7% (and the sound of the 5 pot engine starting to suck up small children and 3 year old cows was a massive side benefit!!). Not bad for £40!! So does anyone have any figures to throw around? Also has anyone fitted a bigger down pipe and a sports zorst to help get all that extra CO2 out the other end? Link to post Share on other sites
packageman23 0 Posted May 19, 2007 Report Share Posted May 19, 2007 i used a HKS green mushrrom filter good enough for biiig powered skylines why not the VIVz... puched a whole thro crumple zone in mk2 chasis leg was only a lil plate held on with 3-4 spot welds used a drain pipe as me cold air feed(iseal roughly 2.5 - 3" piping with the bend at bottom) works awsome my oil temp on the clocks(mfa...i think they call it) never really goes past 94 an thats in summer when am giving it some real sh1t. Link to post Share on other sites
PhillT 0 Posted June 27, 2007 Report Share Posted June 27, 2007 anyone tried the Ramair Maxflow Kit?looking at the BMC but I always like to try something a little different Link to post Share on other sites
Jimjon 28 Posted September 13, 2007 Report Share Posted September 13, 2007 I'm going to be fitting a Pipercross viper kit to mine in the next week. Cost is £250' date=' it has a ram pipe and a carbon fibre heatshield surrounding a reverse flow element. I'll let you know how it goes if you're interested?[/quote']did you do this? any thoughts about it?i've thinking of getting the viper kit for mine Link to post Share on other sites
Phat VR6 3 Posted September 17, 2007 Report Share Posted September 17, 2007 Haven't seen these mentioned atall "Pipercross velocity air intakes" They take the air from outside the engine bay but with the filter at the end of it. Probaly sounds quite evil aswell. I feel like i can trust pipercross quite well as its a brand i feel is well known and I have hurd alot about!! http://www.venommotorsport.com/shop/index.html Link to post Share on other sites
Phat Boi 0 Posted September 23, 2007 Report Share Posted September 23, 2007 Hello Everyone. I bought a Carbonio for mine from awesome-gti. It sounds fantastic and doesn't suffer from heat soak as the induction arm from the filter the MAF is carbon fibre. Cost a lot though bout 215 inc VAT. I'd recommend it though. Link to post Share on other sites
407BHP VR 2 Posted December 8, 2007 Report Share Posted December 8, 2007 Whats wrong with a standard air box ?Derestricted bigger cold air feed and pannel filter !Cheap and works Link to post Share on other sites
tongy 0 Posted December 15, 2007 Report Share Posted December 15, 2007 What about pipercross?? Link to post Share on other sites
joules 0 Posted January 10, 2008 Report Share Posted January 10, 2008 Running a Ram air on mine. Great sound when you floor it and sounds the same as OEM setup when cruising, both at motorway or road speeds. Link to post Share on other sites
Damo 85 0 Posted May 13, 2008 Report Share Posted May 13, 2008 Running a Ram air on mine. Great sound when you floor it and sounds the same as OEM setup when cruising' date=' both at motorway or road speeds. [/quote']Just what i would say aswell. I only have the suparam filter. can hardly tell its modified on tickover or cruising. but open it up and it really screams!! coupled it with a jetex 3box system so now it purrs away almost silently at the lights, and surprises those who take it for a lesser engined golf when i open it up! Link to post Share on other sites
Smokemadpat 0 Posted May 17, 2008 Report Share Posted May 17, 2008 Hi i have put mine on the dyno, I like the VIS kit sound kicks in after about 3000rpm, the tests we done where back to back we fitted the VIS kit on the dyno both run on 97ron with Std map on the car, Will run it again in a week or two see if it adapts up any more Link to post Share on other sites
Recommended Posts