vr1 0 Posted February 10, 2006 Report Share Posted February 10, 2006 can anyone tell me the standard ride high on the vr6 golf,hub centre to arch lip,front + rear? Link to post Share on other sites
petervr6 0 Posted February 11, 2006 Report Share Posted February 11, 2006 HIGH.LOL Link to post Share on other sites
MrBen 0 Posted February 11, 2006 Report Share Posted February 11, 2006 No idea, but you are right it is bloody high! Link to post Share on other sites
mattverth 0 Posted February 11, 2006 Report Share Posted February 11, 2006 Somewhere between K2 and Everest. Interestingly, VR6'S came as standard from the factory with a tank of compressed oxygen, in case owners felt short of breath at high altitude. Link to post Share on other sites
purple highline monster 0 Posted February 11, 2006 Report Share Posted February 11, 2006 also included were life belts due to the "boat" like handling!!! but this is a pic of my standard vr and once it was lowered for comparison!! Link to post Share on other sites
purple highline monster 0 Posted February 11, 2006 Report Share Posted February 11, 2006 i used to find homless people asleep in the gap under the arch!!!!! Link to post Share on other sites
vr1 0 Posted February 11, 2006 Author Report Share Posted February 11, 2006 yes,yes...all very funny,buti'm trying to work out my current ride height,so i can go lower,fink its 40mm....can't afford the luxury of coilovers rite now.who's got a bog standard one out there ?! would anyone admit to it tho :| Link to post Share on other sites
rockabillydoghandler 0 Posted February 11, 2006 Report Share Posted February 11, 2006 Sadly I must put my hand up to that mate, as I have admitted to having standard ride height in my post about 18" alloys and being a newbie to the VR6 world. If you can tell me (In laymens terms please) how to measure it, I will gladly supply my vehicles current ride height.I must lower mine soon, far too many near misses with 747's !amazed Link to post Share on other sites
craggsy 91 Posted February 11, 2006 Report Share Posted February 11, 2006 Measure from floor to arch, on a flat floor so i can tell. As thats how i measured mine on seting coilies upIf not hub centre to arch like has been said Link to post Share on other sites
vr1 0 Posted February 11, 2006 Author Report Share Posted February 11, 2006 Sadly I must put my hand up to that mate' date=' as I have admitted to having standard ride height in my post about 18" alloys and being a newbie to the VR6 world. If you can tell me (In laymens terms please) how to measure it, I will gladly supply my vehicles current ride height.I must lower mine soon, far too many near misses with 747's !amazed [/quote']ha,ha,cool.Yeah hub centre straight up to wheel arch lip,please,as from the floor up wheel diameter is a factor.stop flying !lol Link to post Share on other sites
vr1 0 Posted February 12, 2006 Author Report Share Posted February 12, 2006 phonehandler..thats from the wheel centre up to the wheel archplease Link to post Share on other sites
rockabillydoghandler 0 Posted February 12, 2006 Report Share Posted February 12, 2006 Well I hope this is not too embaressing for me AHEM ( Centre of wheel to Wheel Arch on both front and rear Wheels is 35cm each, this was measured on level ground %-6 I think I may be investing in a lowering kit anytime soon Link to post Share on other sites
vr1 0 Posted February 12, 2006 Author Report Share Posted February 12, 2006 fanks bro,thats a great help Link to post Share on other sites
Recommended Posts