MonkeyJug 0 Posted March 16, 2006 Report Share Posted March 16, 2006 my fk konigsport coilover kit is in the post, hopefully it should be here today (thanks barry)i live in camberley and i'm not able to fit this kit myself - wouldn't have a clue where to start!style dynamix is only 20 minutes from me, but they will only fit the kit (they don't adjust the alignment - which i believe needs to be changed with a new suspension)if they just fit the kit (cost £100), what repercussions would i face with doing ABSOLUTELY nothing else?in your guys opinions, what NEEDS to be done during the fitting?and can anyone recommend a place that will fit it, and do any necessary bits and bobs - i'm willing to travel a little bit.please excuse my naivety!ta... Link to post Share on other sites
Slim 0 Posted March 16, 2006 Report Share Posted March 16, 2006 Any garage should be able to fit them easily, they're no harder to fit than normal shock absorbers, it's a good idea to fit new top mounts at the same time though seeing as they cost so little.You'll need to get your wheels aligned afterwards, but you're not going to do any harm waiting a couple of weeks to get it done.Coilovers sound daunting, but it's basically the same procedure as fitting normal suspension. Link to post Share on other sites
craggsy 91 Posted March 17, 2006 Report Share Posted March 17, 2006 Easier than normat spring/dampers as you dont need any spring compressors Link to post Share on other sites
BAZ C 0 Posted March 23, 2006 Report Share Posted March 23, 2006 glad you got your kit fine mate, hope you get it all fitted and looking damm good.get it fitted first then leave it a few weeks for them to settle, then get a 4 wheel aligment check done on it, shouldnt cost much. Link to post Share on other sites
Recommended Posts