Philipstormy 0 Posted March 24, 2006 Report Share Posted March 24, 2006 Hello all, I have a 93 k plate vr and i just cant get it to start!!!There was at first no fuel or spark, now i jumped 12v to fuel pump and that ran up fine, so took apart the fuel pump relay and cleaned the contacts and now i have fuel!!The engine cranks over fine and all belts turning.However still no spark! it has a new coil fitted and there is a 12v feed to coil present with the ignition on.I pull out a lead and put a plug in and i see no spark! i have also cleaned the crank sensor.Please can anybody help??? i also tried a new ECU i bought off ebay and that still has made no differance !sadAlso when i turn on the ignition the dash lcds all go out?? is this normal??Any help ideas what to try next would be great!!!Phil Link to post Share on other sites
Recommended Posts