disco 0 Posted April 4, 2006 Report Share Posted April 4, 2006 hey up people rite no laughing please i was fitting some nice new speakers in the rear footwells in the back of my 3 door vr6 the other week an it was a bit dark so i decided to loop a bulb through the handle in the roof. fitted the speakers an then started packing up my tools an realised that the bulb had worked its way up an burnt a nice hole in my roof liner!!! :@ so is it easy to take off the roof liner so i can either replace it or cover it with something? (speakers sound really good though) oh an ive bought a proper inspection lamp since!ps. any ideas on coverings for the roof would help. and would you also do the columns? Link to post Share on other sites
cadguy77 0 Posted April 4, 2006 Report Share Posted April 4, 2006 hehe, soz Link to post Share on other sites
disco 0 Posted April 7, 2006 Author Report Share Posted April 7, 2006 i know! the air was blue!! Link to post Share on other sites
Earwig 89 Posted April 9, 2006 Report Share Posted April 9, 2006 Oops. Sounds like something that would happen to me HEhehe.Should not be to difficult to fix. Although I cannot think of anything to cover it with if you look in the back of Golf+ they usually have an advert from people who specialise in interior carpets and roof linings. Try giving them a ring.Mark. Link to post Share on other sites
jaysVR6 2 Posted April 9, 2006 Report Share Posted April 9, 2006 MJ will sort ya mate. Where do you live? Link to post Share on other sites
jellsta 0 Posted April 12, 2006 Report Share Posted April 12, 2006 Its easy to replace the headlining i did it a few months back, they are really cheap at the scrappys and loads of them. as long as its a mk3 with sunroof will fit VR6 no probs. hope this helps !lol Link to post Share on other sites
disco 0 Posted April 12, 2006 Author Report Share Posted April 12, 2006 cheers mate so whats the best way of gettin the clips off all the bits without breaking any of them? is there a special tool that i should be using or will a flat blade screwdriver work? do they come in different colours or is there only the one? Link to post Share on other sites
jellsta 0 Posted April 14, 2006 Report Share Posted April 14, 2006 You have to remove the covers on the center pillars, where the seat belts are attached. also the sunroof seal, Followed by the trim around the top of the roof( i just puleed my gentley until it let go) then it just comes out. but be very carefull as it is real flimsy, a gust of wind would snap it in Half. Then just a case of sliding new one in and replacing all the clips etc. i think i paid about £10.00 from a scrappy for mine a while back. not sure on different colours though, could only find the grey type. hope this helps Link to post Share on other sites
Dubsingh 0 Posted April 28, 2006 Report Share Posted April 28, 2006 hehe' date=' soz[/quote']trust you to hehe lol !lol sorry....mj do em but there is a company that has adz in the back of the golf mag...try them? Link to post Share on other sites
Recommended Posts