delete-me 1 Posted June 23, 2006 Report Share Posted June 23, 2006 Ive seen you guys had a group buy on these cams?Are you happy with them? I mean the lift/duration is abit similar to the Schrick cams. But they are overprized.Dougherty Cams lokks like a good investment, and I have been sending some Emails to MR.Dougherty and he suggested 260 cams for my ZR2 VR6.What you guys think? Link to post Share on other sites
cadguy77 0 Posted June 23, 2006 Report Share Posted June 23, 2006 yeah that GB was organised by me. I'm still running their 268's, and i've had no probs what so ever. they are the same lift and duration as Schrick cams, without the price tag. Link to post Share on other sites
delete-me 1 Posted June 24, 2006 Author Report Share Posted June 24, 2006 What does the GB say about them? Feel any diffrence? Anyone that are not satysfied? Link to post Share on other sites
Lizard Racing 0 Posted June 25, 2006 Report Share Posted June 25, 2006 I run these in my 3.0 S/C, excellent value for money with good overall gains. Pig to map with a blower though! Link to post Share on other sites
delete-me 1 Posted June 25, 2006 Author Report Share Posted June 25, 2006 I run these in my 3.0 S/C' date=' excellent value for money with good overall gains. Pig to map with a blower though![/quote']Ahh.. So I need to remap it? I know they can remap my original Z-Engineering chip, but its alot off work?No, or little gains with just the cams fitted? Link to post Share on other sites
clarkie 1 Posted June 26, 2006 Report Share Posted June 26, 2006 i have seen these on ebay and thinking about gettin some. i was goin 2 get the 268 . Link to post Share on other sites
VR6_Absy 0 Posted June 26, 2006 Report Share Posted June 26, 2006 Can you run these cams with a standard manifold ? Link to post Share on other sites
Earwig 89 Posted June 26, 2006 Report Share Posted June 26, 2006 Can you run these cams with a standard manifold ?I believe they can :-)Mark. Link to post Share on other sites
cadguy77 0 Posted June 26, 2006 Report Share Posted June 26, 2006 Can you run these cams with a standard manifold ?yes you can, i did with no probs at all Link to post Share on other sites
Earwig 89 Posted June 26, 2006 Report Share Posted June 26, 2006 How much would it cost to have them fitted and then a remap after??I have been told it is worthwhile to also replace other parts at the smae time but am not sure what they are.Total cost has got to be pretty high in the end?Mark. Link to post Share on other sites
VRTrickster 0 Posted June 26, 2006 Report Share Posted June 26, 2006 I'm running 264s which I am very happy with and have made a considerable difference accompanied with a port matched inlet mani and re profiled TB! Well worth the money! I did have to pay import charges which come to around an extra £50, but still half the price of Schrick cams and are new also! Link to post Share on other sites
GVK 1 Posted July 12, 2006 Report Share Posted July 12, 2006 I picked up a set of their 268s with very little use and a set of new tappets for £250 - looking forward to getting them in the mk2 which is having an OBD2 2.8 fitted with carbonio CAI, 3.68 FD with Peloquin diff and a few other bits and bobs. Link to post Share on other sites
Recommended Posts