Leaderboard

I don't see stretch as that much of a problem my self. People go on about cornering and stuff with them, and the bead popping. I know people who have had this happen on normal tyres as well. So it just down to how the tyre is fitted. I admit stretch is harder to fit, so needs more attention to get it right. Plus look at jap drift cars, some of them run mental stretch, and they put huge amount of stress on the tyres when cornering. I run 185 35 17 on my summers atm, they are tiny. And I have 195 40 17 on my winter wheels. Summers will be going back on to 195 40 17 soon, and the 185 already

Happy new year guys and gals Hope 2015 is better than 2014 for each and everyone of you! I'm 30 this year so bring back 2014 please lol Have a good one guys Sent from my GT-I9505 using Tapatalk

I think you might have to get the US rocker cover too With this type of manifold on my 24v there is a gain of nearly 40ft lbs torque in the mid range About 20bhp

XBOX? my live ran out a good few months ago when i started my new job. just didnt have the time. what with new job, studying, dj'ing and the car (oh and the missus fits in there somewhere) Anyway a happy new year - i only had a couple of voddys last night so i feel fresh as a daisy lol

You should of heard the creaking as he opened his wallet! It was so ear piercing that his mrs took pitty and flashed the plastic!Bloody spoilt I say [emoji6]

Good to hear feedback from our members Sent from my iPhone using Tapatalk

Thanks for the ones who replied,carried out all the testing you advised,no joy unfortunately,sent ecu away to be tested ,turns out to be faulty thanks again

Got some pics of some road trips..... Love going off in Europe

Looks good mate Sent from my iPhone using Tapatalk

Happy new year all, it's quite amusing seeing the posts, I'm working today so last night was a normal one. I watched some tele, had a brew (I was on call) and finished up the night watching the countries biggest ever waste of taxpayers money on 8 ridiculous over extravagant minutes of over the top fireworks! No wonder we lose so much money from our wages to tax.

Hope everyone has a fantastic 2015 guys and a really sore head tomorrow morning [emoji23] I'd just like to thank everyone who has helped support the club during 2014, the (new) team who's done a fantastic job and fully upto speed so we are all looking forward to bringing some awesome events during 2015 thanks guys!! I'd also like to thank all of the club members, without your support the club would not exist! If you are not a club member already then why not ? your support is needed to help us make the club better for 2015 [emoji106] It's been a fantastic year, and we are very excited what 2

Kids took over mine last night the rascals. Don't feel too shabby myself, and I've not had any bacon yet [emoji23] Sent from my iPhone using Tapatalk

Will be abusing the Xbox later I think mate ! Well once I've taxed the VR6! Forgot it lapsed yesterday and can't find my bloody renewal letter!! Haha the dog. He can be a little monster but he's 8 months old now so calming down a little bit. Gonna be an ace dawg in a few years I hope! Sent from my iPhone using Tapatalk

How are those heads this morning guys? I went bed at 4am meh. Too old for that lark haha Sent from my iPhone using Tapatalk

There's only one way to find out mashupmicky and that's to give it a bash [emoji41] and let us all know if it can be done

Happy new year guys

Very nice buddy. Looks like you have put quite abit of effort in to it. Is that your private plate in the last pic? Or just a show plate. I think it wicked either way

Zzzzzzz Sent from my iPhone using Tapatalk

Well it's not a simple system really, and let's bare in mind my knowledge is of heavy systems that are highly electronically controlled but it is doable on a smaller scale. You need for struts, a tank capable of holding enough pressure, compressor, a form of air dryer to eradicate moisture, 8mm plastic piping, one way check valve before the tank, a pressure regulating valve after the tank, guages, a form of levelling valve or controller and a few other bits depending how complex you want it to be [emoji16] I deal with it daily, hence why I've got coilovers. I simply can't be arsed!

The beauty of working with air systems and air suspension for a living [emoji5]️

I have t yet Pete, I'm always using tapatalk. I need to get on the full site to renew my membership so I'll have a look. Might be interested in a mod position in the near future, sort out the rabble between cabbs and bealieboy [emoji6] I'm on here enough!

Plasti-dip apparently only last a couple of years mind. I'd personally pay an extra few quid and get a nice paint job done on it

I run these. Paid £960 for them but there quality.

Found another pic from last year or was it yr before??

Very nice mate. What are the alloy brackets for? You will love the stealth turbo conversion, looks very OEM and everyone has said how good and reliable they are! Maybe one day I will get one myself. Love my Corrado though! Especially after the new engine stealth built me (nearly run in now!) Pete

Fancied a wheel change, much prefer these!

Faultless seller. Bought some rear lights, they were dispatched promptly and very well packaged. Good job mate and thanks again

I can confirm I am a woman and I own and drive a VR6, this is actually my second one...

Thanks Pete, I'm thinking that too, as more work gets done I'm more excited than when I built my Splittie! Lol..... Gerry boi has had my brakes colour coded to match the mulberry paint, supplied by big Stew too! Going out to see the car tomorrow so might have some new snaps then! :-)

After Stew is finished the car is going to Gerry at PerformanceTek for a full brake over haul, I think he is going to colour code my brake pipes with some lilic ones! Lol he has just sent me a photo of my front Brembos............ These will be painted mulberry very soon! Here is a wee teaser of the car........

Cheers man ;-) So it's looking like it's all painted now and the build up starts real soon! Here is the latest panels that have been painted........ Smoothed wings.... Rear bumper, fully coded.... Modified, smoothed front bumper.... Coded handles.... Grills and trims.... The quality of the paintwork looks first class, this is turning out way better than I ever thought it would! Cheers :-)