Jump to content

VR6Pete

Administrators
  • Content Count

    17,737
  • Joined

  • Last visited

  • Days Won

    161

Everything posted by VR6Pete

  1. There is specialist caliper paint readily available on-line / in stores, but its all in the preparation and ensuring that rust etc.. would advise to remove from car for the best job and use wire brush etc... to remove old rust. Make sure you don't get any on the pistons and bleed nipples so mask them off.
  2. Likes: 1 Old but gold - Website: https://www.vr6oc.com/ - Club Membership: https://www.vr6oc.com/membership - iOS and Android App Available on the AppStore! - DM the page for a shout out #Vr6oc #vr6 #vw #volkswagen #mk2 mk2,vr6oc,volkswagen,vr6,vw View on Instagram
  3. Cheers. This was written off about 10 years ago lol but engine I got built at stealth racing with a schrick inlet VGI [emoji106]?
  4. Where about is the hole? front or rear of the car? It probably has been jacked up incorrectly if front of the car in a previous life, most ars of the age they are now will have similar problems, some not so bad some much worse. It doesn't look terminal but obviously needs to be fixed but until you start to poke around you wont know what you are faced with
  5. Doh. Yeah not good. No idea what brand they are? Usually easily to identify and sometimes able to get Spring direct from manufacturers.
  6. Discuss [emoji854] http://garagewire.co.uk/news/dvsa-updates-guidance-on-stretched-tyres/
  7. Likes: 2 @viw28 - Website: https://www.vr6oc.com/ - Club Membership: https://www.vr6oc.com/membership - iOS and Android App Available on the AppStore! - DM the page for a shout out #Vr6oc #vr6 #vw #volkswagen #mk3 #mk3golf #r32 #turbo #boosted turbo,mk3golf,vr6,boosted,volkswagen,vr6oc,mk3,vw,r32 View on Instagram
  8. Sorry to hijack. But what other mods are you running with your charger along with the cogged setup?
  9. Probably just a bush or something mate. Best advise is to get it on Ramp to inspect. What was the outcome from the visit to the garage?
  10. You tease. Let's see more photos then. What have you been doing to it?
  11. If it was started from cold, VR6's do whine a little until oil thins out a little when upto temp. so if its stopped after a little while then should be ok. When do you get these noises? pulling off? reverse? full lock?
  12. We had 10 last and space was tight (despite swapping plots). But we have 15 this year so really need 15 cars You should ask your mates @mad-dan if they have VR6's of course to come and join in!
  13. Likes: 4 you may have seen already on Facebook that Stealth Racing were broken in on 05-07-2016, absolute disgrace some people and obviously carefully planned! If you are on Facebook please click the following link and click "Share" - Website: https://www.vr6oc.com/ - Club Membership: https://www.vr6oc.com/membership - iOS and Android App Available on the AppStore! - DM the page for a shout out #Vr6oc #vr6 #vw #volkswagen #stealthracing vr6oc,stealthracing,volkswagen,vr6,vw View on Instagram
  14. you may have seen already on Facebook that Stealth Racing were broken in on 05-07-2016, absolute disgrace some people and obviously carefully planned! If you are on Facebook please click the following link and click "Share" https://www.facebook.com/StealthRacingUK/photos/a.535343259830106.118104.166191396745296/1213760341988391/?type=3&theater
  15. Welcome back! As a customer of Opie Oils already, I'm glad that you can pass on savings to our members Pete
  16. Likes: 11 Clean is an understatement with this gorgeous mk2 Jetta! - Website: https://www.vr6oc.com/ - Club Membership: https://www.vr6oc.com/membership - iOS and Android App Available on the AppStore! - DM the page for a shout out #Vr6oc #vr6 #vw #volkswagen #mk2 #mk2jetta vr6oc,vr6,mk2,vw,mk2jetta,volkswagen View on Instagram
  17. I have a vortech v1 and a 2.75" pulley producing 9PSI with 380cc injectors and pulling 294BHP. I would expect similar figures for this depending on pulley size and of course if it has an upgraded impeller. I have standard head gasket too.
  18. [emoji23][emoji23][emoji23][emoji23] I watch this at least once a week!
  19. Maybe if you upload some photos would be good mate and pulley size [emoji106]?
  20. Well. Keeping options open ? I I might have to get some more compomotive mo's if they look ok on Corrado they will allow go 312. I wish to retain 15" wheels though.
  21. VR6Pete

    Tatton Park VW Show 2016

    Hey mate. Would love have you on club stand cPost on on the forum topic in events section and will add you to the list.
  22. One thing people have avoided is head gasket [emoji85] hopefully not but easiest way to test is getting a tester for presence of hydro carbons in coolant system and see. Also check oil cooler too as usually common failure too
×
×
  • Create New...