Jump to content

zerocool

Members
 View Profile  See their activity

  • Content Count

    41

  • Joined

  • Last visited

 Content Type 

Everything posted by zerocool

  1. zerocool
    you will need to source a vr6 syncro gearbox for this ,as the rallye gearbox bell housing won't fit the vr6 motor. I have a vr6 syncro box,and it took me a year to source
  2. zerocool
    8 hours to fit,what a load of rubbish,I fitted mine in 3 hours and that was taking my time. anyone who charges 8 hours labour to fit it is having a laugh
  3. zerocool
    did you change the fuel pressure regulator for the 4 bar one? could be faulty maf sensor,or it could be the rev limiter as it cuts in about that mark
  4. zerocool
    I have a 98 highline engine in a golf rallye,z engineering chrager,with piggy back chip,and aqumist water injection,decat pipe. runs well apart from belt slip at high revs,any one else got probs with belt slip?
  5. zerocool
    maybe vince can clear this up,it was him that told me this too. I must admit he seems to know his stuff
  6. zerocool
    my car idles fine with the maf after the charger.although obd2 cars do respond a lot better to the supercharger than obd1 cars according to vince at stealth racing,there is a different chip needed ,if you put the maf before the charger.
  7. zerocool
    yes providing you have a obd1 car it should go straight on
  8. zerocool
    mine is a bit shorter throw than a b&m shifter
  9. zerocool
    my car is an obd2 and it has the maf between the charger and throttle body,it runs perfect. you definatly need a chip,try vince at stealth racing. also,if you have the maf before the charger you will need a different chip,to having it after.so once its chipped don't go moving the maf around. you also need to get a proper silocone flexi pipe from the maf to throttle body,you should have got one with kit. I got mine from nic saran,but he was a nightmare to get hold of,and parts where missing from my kit. one important thing is make sure you have the maf sensor in the right way round,with arrow o
  10. zerocool
    ok will do,just might take a while,so please bear with me guys
  11. zerocool
    yes they are suitable for the vr6 boxes and any other cable change boxes. please email me requesting pics,I am currently trying to get hold of a camera for this reason. any other queries please email me at the address above
  12. zerocool
    I am selling quickshift gear levers on an exchange basis for £70.which is a lot cheaper than any company I have seen making them I have changed the plastic pivet housing normallymade from plastic and made it from metal,to reduce slop in the lever,and increase strength. reduces throw of lever considerably. email nobbyjersey@hotmail.com
  13. zerocool
    I have a vr6 gearbox in perfect running order,if you can find me a vr6 syncro down pipe,then you can have the box.
  14. zerocool
    am putting my vr6 syncro box back in soon,and thought of getting a lightened flywheel at the same time,just wondered if anyone has any first hand experience of one in a vr6
  15. zerocool
    stealth racing sell em and they are cheaper than that,normally a duff maf sensor will give you lack of power when accelerating,but I woudn't be suprised if it caused it to stall too
  16. zerocool
    has anyone put this on their car,if so is it worth it?
  17. zerocool
    why yo taking it off? are you selling it?
  18. zerocool
    does anybody know if this is true? A corrado vr6 has better gear ratios than a golf vr6 and hence it is a good mod to put a corrado box into a golf vr6 to get better acceleration?
  19. zerocool
    how do you know there are more benefits,if you don't even know the power differnces between the two. it will be a lot harder to fit the 24v motor due to the complex wiring for the engine,not to mention drive shaft problems. yes the mountings are different to the 12v,especially the rear gearbox one. good luck with your quest
  20. zerocool
    have you got the right lambda probe for the car,its not a cheapo halfords one is it? also I think there is a relay for the lambda sensor,might be worth checking that too
  21. zerocool
    i just got a ppe running to my screen wash tank at the mo,but am using a mercedes screen wash which is pretty potent stuff. would like to use 50% methanol,but can't seem to get any over here in the channel islands. my system is the aquamist race sytem,got it off stealth racing.top man vince!!!!
  22. zerocool
    fitted my water injecion to my superchargedvr6 rallye on saturday,I wired it straight to the ign switch. well chuffed with the system,made quite a difference on my car !amazed
  23. zerocool
    ok cool,I also have a list of the fault codes for vr6 corrado but they are the same as obd1 golfs,I could photo copy them and post them to one of you guys,just I havn't got a scanner otherwise I would email them,on this site.
  24. zerocool
    no probs,might take a few days,as I have already installed mine,its very short now,be best if you can get a shifter mech from the scrappy so you can go back to standard if t goes wrong! will take some pics of the standard one and then show you where to cut and modify.
  25. zerocool
    will try and take some photos,who can post them up on here for me?
×
×
  • Create New...