Jump to content

johnym26

Members
 View Profile  See their activity

  • Content Count

    34

  • Joined

  • Last visited

 Content Type 

Everything posted by johnym26

  1. johnym26
    Thx, i will try that on the weekend, hope it will solve the problems.
  2. johnym26
    I need a big hammer to engage 1st and second gear!!!!
  3. johnym26
    Hi guys, the last 4 weeks i have a problem with my gear box. As the weather has changed and got colder, every morning before going to work, i can't engage any of the gears when i 'm starting it up. When the car isn't working i can engage all of them!!!!!! I have to let the car warm up about 15-20 min before i can engage the 2nd gear. After 1-2 km of driving i can then engage all of the gears with no problems at all. Any suggestions appreciated.
  4. johnym26
    Then it will be a 40 min job
  5. johnym26
    If you also have an AC radiator its a little bit tricky because it is mounted in front of the rad you want to replace. If not, its one and a half hour job max. Easy
  6. johnym26
    As you pull it, just turn it left and right and it will pop out more easily.
  7. johnym26
    I have already got my money back with the discounts from gruvenparts and Vibra technics
  8. johnym26
    And here is one of me. Although I doubt if I ever see anyone of you in person, as I am a little bit far away
  9. johnym26
    You mean the ISV???? (Idle Stabilizaton Valve) next to the throttle body or the throttle body itself???
  10. johnym26
    Hi guys i am thinking about changing my suspensions. I have right now koni sport (the yellow ones) and i was thinking to change them.What would you suggest? I want them to be comfortable as i use the car every day but also good handling. thanks in advance
  11. johnym26
    What temp switch you replaced?The one on the thermostat housing? Because i had a same problem and i run twice out of battery since i realised what was going on and i just changed the temp switch on the rad and everything now works just fine
  12. johnym26
    Thx, i will try cleaning it on the weekend to see if the errors go away
  13. johnym26
    bump!!! noone???
  14. johnym26
    Thx guys, i will go for the 4 bar.
  15. johnym26
    Hi guys, i have a OBD I '93 engine and i would like to ask how many bars is the fuel pressure regulator, because the one i have right now is 3 bar and the one i see in ETKA is 4. Which one should i go for? Thanks in advance
  16. johnym26
    How about mk4 dials on your mk3? http://www.kunset.de/onlineshop/502275969e0c2dd04/50227596a411190e9/50227596a4111e2ec.php
  17. johnym26
  18. johnym26
    You could also see dubpower's leads. I just made an order
  19. johnym26
    Hi guys and gals, i have an error at vag-com that says 00561 - Mixture Adaptation 14-00 - Adaptation Limit (Add) Exceeded What might be causing this, because the fuel consumption has gone wild!!!!! Thanks in advance.
  20. johnym26
    You will also have to change the heater unit, as the one working with the climatronic unit uses motors. You will also need all the sensors around the cabin for temperature.
  21. johnym26
    Actually have a look at this http://cgi.ebay.de/Adapter-Golf-4-Tacho-fuer-Golf-3-Vento-Benziner_W0QQitemZ160325676886QQcmdZViewItemQQptZAutoteile_Zubeh%C3%B6r?hash=item160325676886&_trksid=p3286.c0.m14&_trkparms=72%3A1229%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318 it can be done.
  22. johnym26
    Just installed last Friday a set of them on my Vento. Thumps up , A good choice As xyber said much better feeling on accelaraton and gear changes.
  23. johnym26
    Good morning guys and girls. I have a small problem with my fans and auxiliary water pump. When i turn off the car both of them keep working with out stopping even after a 5-15 min. As a result yesterday that i havent noticed it i run out of battery. Could someone please tell me what the problem could be. Thanks in advance.
  24. johnym26
  25. johnym26
    Thanks guys Now lets go for a ride to see if everything is working Thanks once more
×
×
  • Create New...