Jump to content

Charged VR

Members
  • Content Count

    235
  • Joined

  • Last visited

Everything posted by Charged VR

  1. Hello, Got a very nice rotrex charger for sale 250bhp+ and a really adictive noise? Best of luck with your VR
  2. Thanks Dave, Hopefully be trading in the next 6 months, just takes so long to sort everything out. Very interested in what people really want instead of being like some companys and doing what they think you want Thanks again
  3. Hello Im in the process of starting a new VAG repair and tuning cmpany in the greater london area I know that there are alot of companies to chose from but i would be interested to hear any suggestions that you may have or things that current companys do not offer that you feel they should? Any suggestions are welcome
  4. Where in south London are you? I can have a look if you want and show you how i fitted mine. im in Iver near uxbridge
  5. I also used the old fuel pump outer casing to create a sleeve for the walbro as it is slightly too small for the Housing, Just make sure the pump never runs dry, try to not go under 1/4 of a tank as 30seconds of dry running will kill th pump
  6. What Filter are you trying to fit onto it? If you are fitting the pump into the standard swirl pot then you dont use the small bag filter
  7. DUBPOWER, Top Quality and well priced, They do 8mm Standard leads or 10mm aswell
  8. Had the same problem on my old G60 Corrado
  9. I can sort you out a good second hand radiator for £30, Im in Iver near Uxbridge if your interested PM me
  10. Only running 6psi Rotrex and Just got a lower Thermostat and Fan switch and replaced both coolant pumps Never had a problem
  11. Charged VR

    Auto Box

    These sholud light up, small bulb, from memory its the same as the heater ilumination bulb. sometimes the bulbs are just pushed in but others are soldered There is a small allen key screw on the selecter lever side, once the top handle of the lever is removed pull the trim up and you will see the little bulb
  12. The auxilary water pump is down the bottom, almost in the centre, Could be this shot, causing the noise
  13. No Problem, Just remember to get the belt routing correct and the charger turning the right way and the charger fluid feed pipe bled. Andy and Miles will explain
  14. Sent the pictures to you, Hope they help. When is the big day for the install?
  15. Im running standard engine mounts on my 6psi kit. Have you spoken to storm? Well worth a call. If your car has done alot of miles you may see the cat disapear in a cloud of dust out the back!!!
  16. I bought my Boost gauge from Revo tec as the only one i could find that said Supercharger instead of the usual boost or turbo. Genearl engine health check, new plugs if old. Good idea too lose the cat
  17. Can be the Regulator starting to fail, Too much resistance causes the window to roll back
  18. I have sent you a PM about the install but i dont think it made much sense. If you PM me your email then i will foward all the pictures. Well worth speaking to Dub Power for lower temp fan switch, thermostat and better HT Leads. Fantastic noise when on boost. You will be in the petrol station loads when you first start driving it, i now i was!!!
  19. I would replace your Fuel pump with a in tank walbro unit. Made mine run so much smoother when on boost. What PSI are you going to run?
  20. How did you get on with this one mate?
  21. Hello Sammo If you do start this, a friend of mine builds the bodys for the back of the trucks for reasonable money
  22. My golf was cutting out randomly, turned out it was the Reader coil for the imobilizer, Took me ages to find the fault and drove me mad
  23. Sounds like they are guessing and just want to replace the whole lot Best of luck with this one mate!
×
×
  • Create New...