Jump to content

geo7087

Members
 View Profile  See their activity

  • Content Count

    182

  • Joined

  • Last visited

 Content Type 

Everything posted by geo7087

  1. geo7087
    yeh think its 912, the sidewalls stretch really nicely, i think any other 195 tyre would sit completely differently so im going to stick with the falkens
  2. geo7087
    Insurance company are already aware of the 195 width tyres fitted currently, thinking i'm most likely going to stick with the 195 rubber
  3. geo7087
    ah i read it wrong, thought it had to be there by 9am haha, still getting there early with the cleaning gear though
  4. geo7087
    sounds good Mark, would be very interested to see the sump guard progress RE; Arches, ive always been a fan of de-arched but its personal preference, i think de arched with texture top bumpers normally looks quite nice
  5. geo7087
    Ok so the time has come to renew the tyres on My Audi TT comps spec of the wheels is 7.5J et 32. now up until this point I've been running 195/40 falkens on them, giving this amount of stretch on the wheel as i'm having archwork done this month and will shortly after be running spacers out back and possibly a bit of camber i'm wondering whether i go for a thinner tyre. Now after looking through sits my options are as follows 185/35/17 - ruling this out as i think 35 sidewall looks ridiculous 165/40/17 - this is looking like a possibility, to try and get a bit more poke from the edge of the wh
  6. geo7087
    cheers Ben
  7. geo7087
    sweet
  8. geo7087
    Now apart from using a tape measure to get a rough idea im a bit fooked when it comes to getting some measurements for spacing my TT comps wheel specs are 7.5J, et32, currently fitted with a 195 falken tyre which stretched to give a bit of poke from the wheel. Im after having the edge of the wheel itself sitting just outside of the arch with the stretch of the tyre pretty much having the arch sat on it. Arches are being rolled this month so that isnt an issue Has anyone got an idea as to what size spacers i'll need to run front and back for this?
  9. geo7087
    Well the early grille finally arrived! all my exterior decals are now removed, looks much better IMO
  10. geo7087
    I miss my dragon green 1.4 looking at this Looks nice buddy, loving the wheel choice!
  11. geo7087
    nah debadged
  12. geo7087
    company called cth tuning on ebay, can also get Venom motorsports own one, can't wait for mine to arrive!
  13. geo7087
    basically the pipe leading to the oil breather goes to your induction piping, i removed that link from the sensor onwards so only the induction pipe remained, just blanked the hole off with a grommet also blanket off the small pipe connection that goes to the inlet mani
  14. geo7087
    Yeah heat wrapped now
  15. geo7087
    Pipes are well clear, got the air filter itself propped nicely, with the raceland 6-2-1 it sits slightly different so ive got more room, and any electrical wires are cable tied out of the way if it gets noticable in summer i can always mess about with it, ill see how it goes, its easy enough to change back anyways ive still got my smoked indicators so if i change my mind ill swap right back, and i can't wait for an early grille haha
  16. geo7087
    Only just had a chance to update this as ive been bedridden the past few days... fail Vento front First off, Vento front. Got this on just in time for a local fire staton event that went on, unfortunately with a late style grille that was a last minute grab as my early grille still hasn't arrived, however ones being sent direct from Germany, should be here next week As soon as it arrives it will be painted and fitted and should look much neater IMO Sticker stack? Added a bunch of red and white stickers in pattern to the rear window, as with all sticker i chuck on they probably won't last, b
  17. geo7087
    Congratulations! remember the feeling i got when my last car got featured for Fast car mag, best feeling ever well desereved
  18. geo7087
    Sweet deal!!
  19. geo7087
    In the engine bay in the drivers front right corner by the wheel arch, 2 pipes on clear one rubber black leading to a tank or something? can someone tell me what this is? im going through the process of deleting engine bay bits on the way to a smooth bay and trying to get to grips with whats what the i mean is in the very badly edited photo here.... lol
  20. geo7087
    Rears are rolled-ish lol, not fully flat if you get me, really wanting it to sat so ive got the wheel edge just poking by a mm or so outside the wheel arch, or even just with the wheel edge lined up with the arch
  21. geo7087
    they are et32 mate, and i9n all honestly im not sure yet
  22. geo7087
    Properly can't wait for this got a lot to do over the next few months, but will be worth it and car will be ready
  23. geo7087
    Cheers, on a slightly off subject ive got my hotel booking paperwork from you for UD, is there a deadline for it?
  24. geo7087
    Bumping this again, I have changed the Blue temp sensor at the same time as doing a coolant flush, still no temp reading inside the car Im going to change the fan control modeule asap for the fan, but out of interest the yellow plug next to the blue sensor in the thermo housing, what does this do?
  25. geo7087
    195/40 on the front, Falkens on a 7.5j rears are a 205 currently but i wasnt the same on the back and spaced out in time for UD
×
×
  • Create New...