Jump to content

tonygti

Members
 View Profile  See their activity

  • Content Count

    100

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by tonygti

  1. tonygti
    hi guys need your help i took my block down to middlesex rebore to get the bores honed ready for my new piston rings they told me the bores were worn by .7 or a thou? they said its worn alot, a firend told me .7 of a thou is like as thin as a hair? what should i do? is thta hardly any wear or do i need to rebore it?
  2. tonygti
    hello if they are recaro colour concept they are all heated i have a colour concept in black and they are heated,most leather seats were also heated look under the seat for the wiring or relay
  3. tonygti
    thanks guys much appreciated, am going to check out those web sites
  4. tonygti
    im gonna keep looking but thank you i wanna put some pics to show u guys.Also need bits like lightened flywheel new sump obd2 wiring loom etc
  5. tonygti
    hello thank you fro the diagram i work at VW and been on etka at work they for some reason dont list this but i do appreciate your help
  6. tonygti
    hi viw28 when i took the engine apart they are definately NOT the same the top ones have a bit that sticks out of them the bottom ones are c shaped hi six appeal i tried ebay i can get them just i really wanted VW original part as all piston rings bearings conrod shells etc are all VW genuine parts.
  7. tonygti
    hi peps need help, im rebuilding my VR6 engine i just bought and putting back in the crank but.... i ordered all the bearings from VW but the thrust washers are not listed at vw not all of them, i got the top thrust bearings but they dont list the bottom ones.. any ideas?
  8. tonygti
    Ok thanks guys, I didn't get the gearbox only the auto box flywheel or plate
  9. tonygti
    hi guys i bought a auto vr6 engine obd1 coil pack and changing it to obd2. i was wondering if anyone know if i need to balance the crank as now its going to me a manual, i am replacing the bearings and shells but before i do was wondering if anyone has done this before? thank you
  10. tonygti
    tried to uload but says file too big?
  11. tonygti
    thank you for the advise i rebuilding a vr6 from bottom end up block is almsoe done changed piston rings big end berings and con rod bearing now going onto the head soon and heard schrick cams were greats so looking for a set
  12. tonygti
    Did you guys notice a performance difference with these cams and are the cams really lumpy?
  13. tonygti
    throttle body basic re-setting and clean, also make sure all the breather hoses and acuum hoses are fine
×
×
  • Create New...