-
Content Count
66 -
Joined
-
Last visited
-
Days Won
2
Content Type
VR6OC News
Website Content
Profiles
Forums
Calendar
Gallery
Store
Collections
Community Map
Posts posted by zipupurmickey
-
-
Yes still here, 00353877641555 whatsapp
-
Yup still here.
-
Ya still here.
-
-
What psi is the pulley rated too? Is a different cr required?
-
That's Euro, I'm based in Ireland.
-
-
-
Hi John, a friend of mine is selling one if you're interested send me a pm
-
-
-
-
Dale I will still swap for 2.5" and chance it if you like. Ideally need 2" but will try the 2.5"
-
MK4 VR6 Needs to go
https://r.tapatalk.com/shareLink?url=https%3A%2F%2Fwww%2Evr6oc%2Ecom%2Fforum%2Findex%2Ephp%3F%2Ftopic%2F49439-MK4-VR6-Needs-to-go&share_tid=49439&share_fid=55770&share_type=t
You'd make most of your money back on the Recaros. -
-
The V3 is part of the V1/V2/V5 etc family so no it wouldn't fit V9 gear.
The V9 is the odd one out in the Vortech family. The rest will need you to change the engine mount on that side too. -
-
Thanks for the help, im currently in the U.S. so not sure how much it would cost to ship.
I could ship it over no problem, the kit I'm running came from Napa Ca and cost 100 quid incl custom charges etc. So I'd say maybe 25-30 quid to your door for these bits. -
I have everything you need here bar the headunit (V9)
24v VF Engineering Brackets For V9 FS
As title,
I have everything you need here for a stage 1 (6 psi) kit minus Vortech V9 headunit and some plumbing that can easily be fabricated to suit your car. This kit is for a 2.8/3.2 24v engine, can also fit 12v Mk4. These brackets are extremely uncommon and rare to get your hands on by themselves. This is ideal for someone looking to piece their own kit together bit by bit, and is cheaper than buying a full kit from a tuning company. E9P and superchargerinovations do similar kits for around 12-1500 quid. So what do I get?
-VF Engineering bracket that attaches to the V9
-VF engineering bracket that bolts to where the idler bracket is.
- 4 bolts for the V9 bracket.
- 3 bolts and spacers for the idler bracket.
- 6psi Vortech Pulley (stage 1)
- Bosch bov good for 10 psi
I might be able to get my hands on Vf plumbing for a non intercooled setup if required but price will reflect that.
Parts are in Ireland, but price includes postage and packaging to anywhere in Ireland and Uk.
My numbers 00353-877641555 I have whatsapp.
550£ -
Google is your friend, it's been done a good few times.
-
Pete speaks sense, my kit then all the plumbing, them when you have a few quid saved spare go directly to Vortech and buy a headunit. You'll have the lot for 2500.
-
I have a kit left over spare from my Bora in the classifieds. All you'll need is a V9 headunit which you can get directly from Vortech if needs be. Definitely the cheapest option.
-
Yes it will all fit. They're both Mk4's
-
Up for grabs is my set of genuine stamped Vw G60 steelies that have been banded. Tyres are 195 50 which have a nice stretch and have very little wear. Centre caps are all intact and present, no buckles or cracks.
Rears are 10J with a 4" dish and fronts are 9.5J with a 3.5" dish. These are epic looking, ideal Vw Golf mk1, mk2, mk3, Jetta, vento, Derby
4x100
Rears Et -5
Fronts Et 0
10j
9.5j
Rotrex supercharger kit
in Engine Parts
Posted
How much? I presume this is for the Vr 12v? All brackets etc included?