Jump to content

Vr6pates

Members
 View Profile  See their activity

  • Content Count

    87

  • Joined

  • Last visited

 Content Type 

Everything posted by Vr6pates

  1. Vr6pates
    Ok then then cus i have 205 tyres on as well but when i put the merc wheels on they will have new tyres fitted to them so will try yhat then.gaotta say tho when have all the new components fitted on the front with powerflex pushing and stuff what a difference it makes
  2. Vr6pates
    Does every vr pull then
  3. Vr6pates
    So the drive shaft is causing the problem then with pulling under acceleration sounds to me like I'm at white end now as far as this goes
  4. Vr6pates
    Have had the car tracked by Jodie at midland vw so everything is set properly drives nice now but when drove it it still pulled to the left so he drove on the wrong side of the road and it pulled to the right then.but on accelerating we noticed it pulled to left Abit then stopped after acceleration he said that it's down to talk steer as mk1,2 and 3 were destined to be left hand drives and we're properly done for right hand drives something to do with the left side drive shaft is shorten than the right that's why I'm getting the pull
  5. Vr6pates
    Same as lukey said i did mine last weekend and jus undone the back one a jacked engine up just enough to clear
  6. Vr6pates

    Tyres

    Vr6pates replied to Vince12v's topic in General Chat

    Toyo r888s had these on a starlet turbo absolute briliant tyre next best thing to a slick
  7. Vr6pates
    Ok then ile giv that a miss going to change the rack I think I have seen some reconditioned ones for 150 + are they any good they offer a two year guarantee so they must be confident in selling them
  8. Vr6pates
    Sorry my mistake here it is 201022137467
  9. Vr6pates
    Will this fit a vr6 with the right pulley
  10. Vr6pates
    Do you recon i should change the others then instead of just the one thats been changed
  11. Vr6pates
    Well after seeing that about engine mounts I recently renewed an engine mount on the passenger side and noticed that the gearbox wining after it
  12. Vr6pates
    Right have had the car tracked up now and is reading true on the computer but after driving it home its still pulls me to the left on accelerating and comes back to normal when stop.what could this be maybe gearbox issues rack i dont know im loosing the love for it now
  13. Vr6pates
    Does seem alot beta tho its not as violent as before the old bushes were nackard for the bottom arms especially the bigger ones of the two.the shaft itself inside the bush was jus spinnin around doing nothing
  14. Vr6pates
    Right finally got torunf to fitting my new ball joints drop links and flow flex bushes and have to say still pulls abit when accelerating but havent had it tracked yet so thats on the next to do list.will keep u updated about whats happening
  15. Vr6pates
    Have come across this website and seem to sell some nice stuff might be getting some of the cluster sets and rear beam bushes http://vwpartsinternational.com
  16. Vr6pates
    Right had a little test tonyt driving along at 70 then jut stamped the brakes on and its stopped lovely and true no pulling or anifin.am going to swap the front right tyre with the baxk as have done it on the passenger side but not drivers so will c how that goes tomorrow
  17. Vr6pates
    What have you tried mate
  18. Vr6pates
    Not yet buddy am still waiting for the bushes.think I'm going to replace evrithing for new so if it is the steering rack parts will be new for when that is fitted
  19. Vr6pates
    Have jus bought some flo flex bushes there a good price you get a full set gor each side
  20. Vr6pates
    Well ive just bought some ball joints off ebay these are them there made in germany so 220785795000.wher to get bushes from i dont know
  21. Vr6pates
    Ok then thankyou will order them now
  22. Vr6pates
    Ok then so what should i use for number 6 to bolt through bush ie
  23. Vr6pates
    Ok then i know there is two bushes on the bottom arms so do i change the back one for r32 and which one for the front
  24. Vr6pates
    Ok thanks i will try that 1st its cheaper and not a bigger job as doing the rack tbh.alot of people said to change them for r32 and tt bushes or something is this right
  25. Vr6pates
    Oh briliant thankyou i hope its this maybe i could changevthe bottom arm bushes and the anti roll bar connections like number 17 in the picture
×
×
  • Create New...