Jump to content

Vr6pates

Members
 View Profile  See their activity

  • Content Count

    87

  • Joined

  • Last visited

 Content Type 

Everything posted by Vr6pates

  1. Vr6pates
    Ball joints what do you mean drive shaft etc
  2. Vr6pates
    So my next question is where to get a rack from do i get a recon one or new
  3. Vr6pates
    Have swapped my two front wheels over and still no joy.have spokon to jodie at midland vw and he says its the rack he guna put it on the geometry machine and have a luk but from the feeling its seems easier tobturn left than right
  4. Vr6pates
    What else could cause this bottom arm bushes etc
  5. Vr6pates
    After having it tracked drove it home which is bout 2mins away from me but the roads are terrible but gping shopping today on the motorway its still the same pulling to the ledt.get annoyd with the car now cus just chucking gud money at it and nothing getting any better help help please
  6. Vr6pates
    Ok then but all the wheels are et 44 so was thinking 15mm on the front but dont know what to get for back cus if im right the fronts are guna look wider than the back then so what to i buy to make it look ok plus dont want them massivly sticking out the arches
  7. Vr6pates
    Nice car looks abit like the new a class from the back abit
  8. Vr6pates
    +1 try the pipes by the header tank and check all hose connections aswell because after time they tend to leak have just done all mine
  9. Vr6pates
    Have found a place and theyve done it now.thankyou for your help tho
  10. Vr6pates
    Have fitted new tie rods and track rod ends today and now ive got a problem that nobody will track it for me cus its been lowered wat a load of bxxxxxxs.i wudnt mind but they can still get the clamps on so wats the problem
  11. Vr6pates
    Just got to find some adaptors there bludi expensive for wat they are
  12. Vr6pates
    Sorry meant 15mm
  13. Vr6pates
    I would like abit of stretch was thinking 175 50s.just not sure of adaptor thickness maybe 1m for front but what for the back
  14. Vr6pates
    Have just looked at the specs of the merc they came off and the brakes on the front of the car are 284mm so I should think they are gunna fit.just don't know what tyres and adaptors width to use
  15. Vr6pates
    Have bought some wheels which i lead to beleave were 16s but on getting home and having a proper look they are 15s with an et of 44 will they fit over the brakes or have i just wasted my money they are mercedez alloys which i know ive got to buy adaptors but dont know which size for fron or back the wheels are 7j wide
  16. Vr6pates
    The car is black so was thinking something like a Matt black or Matt anthracite don't want anything with a shine.i like these cus they are Abit old school and it's different
  17. Vr6pates
    Have just purchased these they are 16' 8j wide and 5x112 just got to get some adaptors to fit them now.what do you guys think obviously they need painting but hopefully they will look ok 281228626656
  18. Vr6pates
    Try stealth they are very good
  19. Vr6pates
    Sorry guys they are 17s.am in abit of bother with these as the car is lowered 40mm spring n shocks.will they need much arch work as don't really want to mess around with all that tbh and what tyres do I use on them ie size wise
  20. Vr6pates
    As above will these fit on the car as I am arranging to pick them up tomorrow and just want to double check they will fit
  21. Vr6pates
    As above have had ago agAin today but cannot find a problem the relays are working can hear them both buzzing but don't know what to check next
  22. Vr6pates
    Have you checked that ur getting enough fuel through and the pressure.because I had thus in a starlet turbo and it turned out to be pinking because of the fuel wasn't getting through then had a problem with a boost leak just felt dead flat but that was a split in a cooler hose
  23. Vr6pates
    Have come across a set of Porsche wheels and theyre et45 9j will they fit
  24. Vr6pates
    ok will have a look as i had my mot today and he said there was no play in track rods and bottom arm bushes just that they were abit spong.but when putting wheel back on the other day and tightenening the nuts up i noticed the wheel would move back abit
  25. Vr6pates
    right guys havent had my car long and the car has been pulling to the left quite bad since had it.jacked it up the other day and noticed that the inside of the tyre on the passenger side is worn leading me to think that the tracking is out.plus when i accelerate it pulls really badly then when lef off the accelerator its not so bad
×
×
  • Create New...