Jump to content

mk3vrlouis

Members
 View Profile  See their activity

  • Content Count

    34

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by mk3vrlouis

  1. mk3vrlouis
    I have one, off the road and dry stored at the minute. It needs a fair bit of work to make it mint but I'm slowly getting through it. Everything mechanical has been done over the past few years so it's all bodywork/cosmetic that needs doing now. It has newly powdercoated speedlines off the Corrado on it at the moment, all working electricals, ruined drivers seat base (looking at having both seat bases re-trimmed). Bubbling on both rear arches and on boot lid. Sills are knackered, front left of floorpan has rusted through. It needs an overhaul of the bodywo
  2. mk3vrlouis
    Sorry for slow response I've not been on here over the holidays! The 20vt manifolds are 1.5inch sch10 for the primaries, secondary part merging into turbo is 2inch sch10 coned down to 47mm ID at the turbo. Fully back purge gig welded to a very high standard. (aiming to sell at around £700) We could definitely develop a full stainless manifold or something coming off stock to go with your kit. Something off stock mani would be a lot more cost effective I think. Downpipes are definitely something we can do, 02 sensors aren't much bother to add in.
  3. mk3vrlouis
    Hey people, Just wondering if there's a demand for decent quality stainless manifolds for NA and Turbo VRs. Basically I've seen a lot of people buying Chinese eBay manifolds or cast turbo manifolds and thought I could help replace them with something decent! We've just made up a 20VT manifold (prototype) super simple and same as stock turbo placement so no messing around but miles better flow. I've attached a picture of it so you can have a look. I've got a VR6 daily and soon to be turbo'd track VR6 too so have the opportunity to develop a good manifold fo
  4. mk3vrlouis
    Sent you a message regarding wings, bonnet and bumper.
  5. mk3vrlouis
    Yes that's fine, I might be coming across to xscape at castle ford so could meet you there
  6. mk3vrlouis
    What time do you think you could get here for? I have it at my friends house so would have to collect it and bring it to mine
  7. mk3vrlouis
    Yup, came out of a 3 door vr6 donor car I've got
  8. mk3vrlouis
    Sorry mate I'm leaving at 5am so won't be able to, I'll let you know if anything change over the next couple of days
  9. mk3vrlouis
    Im going away tomorrow very early so if you were to bring me £200 cash today I would let you take them. Otherwise I have kind of got an agreement with someone else and don't like to mess people around.
  10. mk3vrlouis
    Hi Mate, I think you may have just missed your chance, I've had them for months but think someone is coming to collect on Monday/Tuesday. If they don't come I'll be sure to let you know on here.
  11. mk3vrlouis
    Ive got manifold back full exhaust sat in the shed, would have to be taken off the car but it's halfway there already. I'm in York if you would want to come get it.
  12. mk3vrlouis
    Is the drivers door in somewhat half decent condition on the 5 door? It'll be getting paint anyway but no rust is ideal. Maybe interested in the bonnet also
  13. mk3vrlouis
    I'm near York, I'll take £180 for it all need the space
  14. mk3vrlouis
    Yes they are, got some interest but I've been out of the country for a while so still have them!
  15. mk3vrlouis
    I do indeed! Left the country shortly after putting them for sale so I still have them at home. I'll be back on the 3rd August if you're interested
  16. mk3vrlouis
    I've got a set of 4 if these ones have gone
  17. mk3vrlouis

    Bumper ducts

    mk3vrlouis replied to Cooz93's topic in Body Parts

    Would you take £30 posted if paid today? If you still have them that is...
  18. mk3vrlouis
    Is the highline badge immaculate? Mine's got a scratch across it so need a new one but so difficult to find...
  19. mk3vrlouis
    Going up on eBay tomorrow if no one wants them by then, drop me a message if you decide you'd like them!
  20. mk3vrlouis
    Turns out that the passenger driveshaft was shot even though both cv's appeared perfectly fine on it!
  21. mk3vrlouis
    Yehh I've still got them, had a few people mess me around so just doing them as collection only now. Full interior and should be able to find a place in the 6n to put the switch so you can keep them heated too.
  22. mk3vrlouis
    Don't know any near me but i'll ask around to see if any local garages have one, seems like a good idea cheers!
  23. mk3vrlouis
    New ball joints and droplinks, don't think its subframe related as it sounds like a moving part but they've all been replaced bar the passenger driveshaft. Might just change it incase theres a problem with it thats not obvious
  24. mk3vrlouis
    Just put in new lower arms with r32 rear bush and polybush front. New polybush top mounts too. It sounds like something grinding while its rotating, exactly like a knackered CV but its not a CV confusingly.
  25. mk3vrlouis
    Hi there, I've just changed everything drivetrain related to try and solve a noise that I cant work out. Theres a clunky noise coming from underneath my feet while i'm driving and I can actually feel it clunking under my feet too. I've replaced everything on the drivers side: New driveshaft (well had 3 second hand ones in first) New Ball joint, drop links, hub and wheel bearing, track rod ends. Changed the gearbox yesterday to a good condition box because I thought the noise was my Diff but its still there so i'm completely stumped. I haven't replaced pa
×
×
  • Create New...